| Quantity: | |
|---|---|
NHY-F006
NHY
| Parameter | Description |
| Material | Premium-grade stainless steel, alloy steel, brass |
| Surface Treatment | Zinc plating, nickel plating, passivation |
| Dimension Range | Customizable according to requirements; Tight tolerances ensured |
| Temperature Range | -40℃ to 600℃ (dependent on material selection) |
| Load Capacity | Varies by design; Consult for specific load-bearing requirements |
1. Preparation of raw materials
For raw material preparation, suitable metal bars are cut into appropriate lengths, serving as the base materials for our precision fittings.
2.Rough Machining
Use rough machining tools on a machining center to perform initial cutting on the raw materials, removing most of the excess material to form the approximate shape of the joint.
3.Finish Machining
Switch to high-precision tools for fine cutting of the roughly machined joint, ensuring dimensional accuracy and surface finish.
4.Surface Treatment
Treat the joint surface through chemical or physical methods, such as electroplating, heat treatment, etc., to improve its corrosion resistance and hardness.
5.Quality Inspection
Use various inspection equipment, such as coordinate measuring machines (CMM), hardness testers, etc., to conduct comprehensive inspections on the finished joints, ensuring compliance with quality standards.
Precision at Its Finest
Tailored to Your Needs
Industry - Wide Adaptability
Safeguarded Delivery
100% dimensional inspection via CMM
Material certification (RoHS, mill test reports)
Fatigue and torque testing for critical applications
ISO 9001, ITAF 16949, ISO14001
| Parameter | Description |
| Material | Premium-grade stainless steel, alloy steel, brass |
| Surface Treatment | Zinc plating, nickel plating, passivation |
| Dimension Range | Customizable according to requirements; Tight tolerances ensured |
| Temperature Range | -40℃ to 600℃ (dependent on material selection) |
| Load Capacity | Varies by design; Consult for specific load-bearing requirements |
1. Preparation of raw materials
For raw material preparation, suitable metal bars are cut into appropriate lengths, serving as the base materials for our precision fittings.
2.Rough Machining
Use rough machining tools on a machining center to perform initial cutting on the raw materials, removing most of the excess material to form the approximate shape of the joint.
3.Finish Machining
Switch to high-precision tools for fine cutting of the roughly machined joint, ensuring dimensional accuracy and surface finish.
4.Surface Treatment
Treat the joint surface through chemical or physical methods, such as electroplating, heat treatment, etc., to improve its corrosion resistance and hardness.
5.Quality Inspection
Use various inspection equipment, such as coordinate measuring machines (CMM), hardness testers, etc., to conduct comprehensive inspections on the finished joints, ensuring compliance with quality standards.
Precision at Its Finest
Tailored to Your Needs
Industry - Wide Adaptability
Safeguarded Delivery
100% dimensional inspection via CMM
Material certification (RoHS, mill test reports)
Fatigue and torque testing for critical applications
ISO 9001, ITAF 16949, ISO14001
